Cinema 4D Liquid Simulation with the Liquify Modifier

Cinema 4D Liquid Simulation with the Liquify Modifier
Cinema 4D liquid simulation, painting edition
Liquify Modifier • Mesh Emitter • Flow Velocity

Cinema 4D liquid simulation, added in 2025.3, can turn any particle setup into liquid with the Liquify Modifier, as this fluid painting shows.

  • Canvas: A 1920 x 1080 cm plane carries the painting as a Vertex Color Map, inside a Collider cube with Surface liquid collisions.
  • Particles: A Mesh Emitter at 1000 per frame (5000 for the final), lifetime 75 frames, speed 0, coloured from the map.
  • Liquid: Turbulence plus a default Liquify Modifier, scene gravity at 0 cm, a 100 cm Gravity Force and a keyframed Friction Force.
  • Currents: A Particle Node Modifier crosses a 2000% Random Field with the surface normal and mixes it with the liquid velocity at 50%.
  • Practical Path: Cache the particles before rendering and plan passes with the multi-pass guide.

What Changed with Cinema 4D Liquid Simulation?

Cinema 4D liquid simulation arrived natively in version 2025.3 (June 2025). Maxon’s release notes list two ways in: generate liquid particles with the Liquid Fill emitter, or turn regular particles into liquid with the Liquify Modifier, which works with the existing particle modifiers and forces. Cinema 4D 2026.1 later added a Liquid Flow Emitter for continuous streams.

This VFXRendering tutorial takes the second route in a creative direction. A painting inspired by Salvador Dali’s The Persistence of Memory is turned into particles, liquified, and pushed around until the melting clocks dissolve into waves. Every value below comes from the narration.

Abstract Fluid Painting with Liquify Modifier, tutorial published on the VFXRendering YouTube channel

1. How the Liquify Modifier Works

According to Maxon’s liquid simulation introduction, the Liquify Modifier adds liquid properties to standard particles, so they start reacting with each other like a fluid. Its Liquid Contribution parameter starts at 100%, which activates the full liquid behaviour. That means you can keep using a Mesh Emitter, vertex colours and forces you already know, and add the liquid behaviour as one more modifier. One caveat from the same page: at 100% contribution, liquid particles no longer react to modifiers that change their direction of movement, only to physics and external forces; lower values bring that influence partly back.

Figure 1.1Fluid painting setup in Cinema 4D 2025.3
VFXRendering tutorial, Jul 2025
STEP 1Painting Plane1920 x 1080 cm,Vertex Color MapSTEP 2Container CubeCollider tag,Surface collisionsSTEP 3Mesh Emitter1000 per frame,lifetime 75STEP 4Turbulencedisperses theparticlesSTEP 5Liquifydefault settingsturn dots to liquidSTEP 6Gravity + Friction0 scene gravity,100 cm forceSTEP 7RS Matrixfills gaps,vertex coloursSTEP 8Flow VelocityParticle NodeModifier, blend 50%
Steps that create the liquid motionScene and look setup
Workflow diagram, not measurements

1.1 Liquid Fill Emitter or Liquify Modifier?

Both routes end in the same liquid solver, but they start from different places. The Liquid Fill emitter creates liquid particles directly, which typically suits a glass being filled or a splash. The Liquify Modifier starts from particles you already have, so it fits cases where the shape or colour of the particles matters before they turn liquid, like this painting. Maxon describes the modifier route as converting particles that already exist, and recommends a Blend Modifier when you want to mix liquids with different properties such as colour or viscosity. For a canvas, the modifier route keeps the image intact until the forces start to move it.

2. Cinema 4D Liquid Simulation Painting, Step by Step

2.1 Step 1: Build the Painting Plane

Create a Plane with dimensions of 1920 by 1080 cm, matching a typical canvas ratio. Add a Vertex Color Map and apply a Classic Standard Material prepared with the painting. Use a Shader Field to drive the Vertex Color Map, so the colours of the image are stored on the plane’s points and can be passed to the particles later.

2.2 Step 2: Add a Container

Create a Cube slightly larger than the plane to act as a frame for the fluid and give room for the distortion. Add a Simulation Tag set to Collider, choose Collision Side Both, and under Liquid Collisions set Mode to Surface.

2.3 Step 3: Emit Particles from the Painting

Create a Mesh Emitter and use the painting mesh as its emission geometry. Set Rate to 1000 particles per frame, Lifetime to 75 frames and Speed to 0 cm. For the color map, use the Vertex Color Map from Step 1, so every particle is born on the painting with the colour of the point underneath.

2.4 Step 4: Start the Cinema 4D Liquid Simulation with Liquify

Apply a Turbulence Force so the particles start to move, then add the Liquify Modifier with its default settings. Press play: the painting’s surface turns liquid and forms ripples under the turbulence.

2.5 Step 5: Replace Scene Gravity and Add Friction

Press Ctrl+D to open Scene Settings and, under the Simulation Scene, set Gravity to 0 cm. Then add a Gravity Force with an Acceleration of 100 cm for a pull you control. Raise the emitter Rate to 5000 so the artwork looks more fluid and wavy, like water. Add a Friction Force and keyframe its strength so the first burst of movement calms down gradually.

2.6 Step 6: Fill Gaps with an RS Matrix

If gaps appear between the waves, add an RS Matrix to fill them, and colour it with a Plain modifier driven by the original Vertex Color Map. At this point the painting reads as a shimmering water surface, like waves on a lake.

3. Adding Flow Velocity to a Cinema 4D Liquid Simulation

Waves alone look calm. To make the paint drift in currents across the canvas, the tutorial adds flow velocity. A Field Force can do it, but the video uses the Particle Node Modifier for more control, with the same surface-flow trick as the abstract particle flow tutorial on this channel.

3.1 Step 7: Read the Surface Normal in Node Space

Open the node space of a Particle Node Modifier and create an Input Object Link to the original painting plane. Use Generate Point Normals, Closest Point on Surface and Mesh Property Interpolate to get the surface normal at each particle’s position.

3.2 Step 8: Build the Flow and Blend It

Give the Particle Node Modifier a Random Field with Scale 2000% and Animation Speed 100%. In the node graph, a Cross Product node combines the field direction with the surface normal, and a Scale node adjusts its strength. A Mix node then blends the original velocity with the new flow velocity at 50%, so the liquid keeps its own motion while following the currents. The Random Field’s Contour Mode, Spline Range and Spline Animation Speed give further control over the pattern. When you are happy, cache the particles.

Settings Cheat SheetValues from the narration

Cinema 4D Liquid Simulation Settings Used in the Tutorial

Cinema 4D 2025.3 or later; values as stated in the video.

Object Parameter Value Why it matters
Planecanvas Size 1920 x 1080 cm Canvas ratio for the painting.
Container CubeSimulation Tag Collider, Side, Liquid Collisions Both, Surface Keeps the liquid inside the frame.
Mesh Emitterfirst pass Rate, Lifetime, Speed 1000 per frame, 75 frames, 0 cm Particles start still on the painting.
Mesh Emitterfinal pass Rate 5000 per frame Denser, more water-like surface.
Liquify Modifierliquid Settings default (Liquid Contribution 100%) Turns particles into liquid.
Scene SettingsSimulation Scene Gravity 0 cm Removes the default pull.
Gravity Forcecustom pull Acceleration 100 cm Controlled, directional gravity.
Friction Forcedamping Strength keyframed Calms the first burst of movement.
Random Fieldflow Scale, Animation Speed 2000%, 100% Large, moving current pattern.
Mix nodeflow blend Blend 50% Mixes liquid motion with the currents.
Test at 1000 particles per frame and raise to 5000 only for the final pass; the simulation cost typically grows with the particle count.

4. Caching and Rendering a Cinema 4D Liquid Simulation

Cache the particles once the motion is approved, as the tutorial does. A liquid simulation depends on every previous frame, so a cached result is the most reliable way to make sure each frame renders the same on every machine.

Long liquid sequences add up quickly. Our render farm comparison lists managed farms and remote machines side by side. iRender is one remote option where you rent a server with 1, 2, 4 or 8 GPUs and run your own Cinema 4D 2025.3 or later. Billing stops when the server is shut down, either with the Shutdown button or a shutdown set in the Scheduler, so leaving a finished render on an idle machine still costs money.

5. Troubleshooting a Cinema 4D Liquid Simulation

5.1 Symptoms, Causes and Fixes

TroubleshootingSymptom, cause, fix

Common Liquid Painting Problems and Fixes

Based on the tutorial setup and Maxon documentation.

Symptom Likely cause Fix
Liquify Modifier missingVersion Older release: liquids arrived in Cinema 4D 2025.3. Update to 2025.3 or later.
Liquid falls off the canvasGravity Default gravity on: the scene gravity pulls everything down. Set scene Gravity to 0 cm and use a Gravity Force at 100 cm.
Liquid leaks out of the frameContainer No collider: the cube is not set up for liquid collisions. Collider, Side Both, Liquid Collisions Surface.
Particles have no colourEmitter No color map: the emitter is not reading the Vertex Color Map. Assign the Vertex Color Map in the Mesh Emitter.
Gaps between wavesLook Sparse particles: rate too low or no filler. Raise the rate to 5000 and add an RS Matrix.
Motion is too chaoticForces No damping: the first burst keeps going. Keyframe a Friction Force to calm it.
In this setup, gravity and the container are the first things to check before tuning the flow.

Related techniques: the particle side of this setup is covered in the Cinema 4D Particle Node Modifier guide and curl noise in Cinema 4D.

Maximum Speed, Absolute Freedom. Render long Cinema 4D liquid sequences on dedicated multi-GPU servers. Render with iRender →

See more: Dual Mesh in Cinema 4D

FAQ: Cinema 4D Liquid Simulation

Which version of Cinema 4D has liquid simulation?

Cinema 4D 2025.3, released in June 2025, introduced native liquids: the Liquid Fill emitter and the Liquify Modifier. Cinema 4D 2026.1 added a Liquid Flow Emitter for continuous streams. The tutorial uses the Liquify Modifier, so it needs 2025.3 or later.

What does the Liquify Modifier do?

It converts standard particles into liquid particles that interact with each other. Maxon notes its Liquid Contribution starts at 100%, which activates the full liquid behaviour. You can keep using your usual emitters, vertex colours and forces and add liquid behaviour as one more modifier.

How do I keep the liquid inside a frame?

Use a Cube slightly larger than the painting as a container. Add a Simulation Tag set to Collider, choose Collision Side Both, and set Liquid Collisions Mode to Surface, as in the tutorial.

How do I give the liquid the colours of an image?

Store the image on the emitter geometry as a Vertex Color Map, driven by a Shader Field, then assign that map as the color map of the Mesh Emitter. Each particle is born with the colour of the point underneath it.

Why is my liquid falling off the canvas?

The default scene gravity is still pulling it. The tutorial sets Gravity to 0 cm in the Simulation Scene settings, opened with Ctrl+D, and adds a separate Gravity Force at 100 cm so the pull is controlled.

How do I add currents to a liquid simulation?

Add flow velocity. The tutorial uses a Particle Node Modifier that crosses a Random Field direction with the surface normal, scales it and mixes it with the original velocity at 50%. A Field Force is a simpler alternative.

Sources

  • Maxon, Liquid Simulation introduction, read 20 November 2026.
  • Maxon, Cinema 4D 2025.3 release notes (June 18, 2025) and Cinema 4D 2026.1 release notes (December 3, 2025), support.maxon.net.
  • VFXRendering on YouTube: Abstract Fluid Painting with Liquify Modifier (Cinema 4D), July 2025.
  • iRender Quick Start on billing and Shutdown (irendering.net/quick-start) and price page, read 20 November 2026.
Written by

The VFXRendering editorial team writes about render farms, cloud GPU rendering and VFX pipelines. Prices, versions and features are read from each vendor’s published pages and dated in the Sources section of each post.

Latest comment

LEAVE A COMMENT