Cinema 4D Redshift Animation: A Yellow Submarine Scene With Paper Fold, PolyFX and Bubbles

This cinema 4d redshift animation project builds a toy-like yellow submarine scene, then makes it unfold like folded paper using a cloth simulation played backwards.
- Models: A submarine from primitives and deformers, a 600 x 100 x 600 cm Landscape, seaweed, coral and cloned fish.
- Bubbles: Five spheres with Balloon tags pulled together by a Field Force at a strength of -300, plus a Cloner running bubbles along a spline.
- Paper fold: Polygon Reduction for a low poly look, a Cloth tag, Turbulence and Rotation forces, then the result played in reverse.
- Reveal: PolyFX with a Plain Effector moving polygons 100 cm, masked by a keyframed Linear Field.
- Render: Redshift camera, an area light, Car Paint materials and a 1920 x 1080 output, all in Cinema 4D 2024.
A cinema 4d redshift animation does not need a fluid sim or a particle cache to look rich. This VFXRendering tutorial builds a small underwater diorama around a yellow submarine, inspired by the Beatles song and by the submarine model from E.J. Hassenfratz’s training series, and then makes the whole scene fold out of crumpled paper. The paper fold idea comes from a Tutorial View+ technique; the narrator, Ryu, combines it with MoGraph and Redshift.
The video runs 27:51 and is mostly screen recording with chapter cards, so most settings below were read from the Attributes panel on screen. Where a value was not visible, we say so instead of guessing.
Table of Contents
1. What This Cinema 4D Redshift Animation Project Covers
The tutorial is split into six chapter cards. Each one produces a piece you can reuse in other projects: the bubble rig works on any underwater shot, and the reversed cloth trick works on any model you want to “unfold” into place.
SIX STAGES OF THE SUBMARINE SCENE
Start times are approximate, taken from the narration and chapter cards.
| Chapter | Main tools | Result |
|---|---|---|
| 1. Modeling0:55 | Primitives, Taper, Bulge, Symmetry, Landscape, Capsule, Volume Builder | Scene geometry submarine, sea floor, seaweed, coral, fish |
| 2. Bubbles13:39 | Sphere, Connect, Balloon tag, Field Force, Friction, Cloner on spline | Reusable rig bubble clusters and a propeller trail |
| 3. Paper fold18:31 | Polygon Reduction, Cloth tag, Turbulence, Rotation, Alembic, keyframes | Signature effect scene crumples, then plays back unfolding |
| 4. Backdrop and water22:09 | Backdrop, displaced water plane | Environment horizon and moving water |
| 5. PolyFX and keyframes22:42 | PolyFX, Plain Effector, Linear Field, Random Field | Reveal polygons fly in and settle |
| 6. Camera, lights, materials24:52 | RS Camera, RS Area Light, RS Car Paint | Final look render in the Picture Viewer |
2. Modeling the Submarine, Sea Floor and Fish
2.1 The submarine body
The hull is built from simple parametric objects rather than sculpting. On screen the object list shows a Subhull, Hull Welding rings, a Porthole with Porthole Glass under a Symmetry object, a Scope Base cube with a Taper deformer, a periscope Scope with a Cloner for its weld rings, and a Propeller. The propeller blades get a Bulge deformer, and the cube under the periscope sits at P.Y 80 cm in the frame we read. Keeping the parts as separate objects matters later, because the paper fold and PolyFX stages both work on the polygons of a connected copy.
2.2 Landscape and sea floor
The sea floor starts as a Landscape object with Size 600 x 100 x 600 cm, Width and Depth Segments at 100, Rough Furrows and Fine Furrows at 50%, Scale 1, Sea Level 0%, Plateau Level 100%, with Multifractal and Borders At Sea Level enabled. The diorama base is a cylinder-style disc with sand mounds pushed up by a Displacer masked with a Cylinder Field, plus a Lathe for the sand rim.
2.3 Seaweed, coral and rocks
Each seaweed strand is a Capsule with a Bulge and a Wind deformer, scaled flat (for example S.X 1.5, S.Y 1, S.Z 0.2 on one strand) so it reads as a leaf. The coral is a branching spline turned into a Volume Builder mesh, with a Spline Smooth brush (Strength 100%) used to relax the branches before meshing.
2.4 Fish with a Cloner and Random Effector
The fish is a low poly body inside a Subdivision Surface, with a Taper deformer shaping the fin. A Cloner spreads copies around the submarine and a Random Effector in Relative mode adds position offsets of -60, -25 and 60 cm on X, Y and Z, with Uniform Scale at 0.8. A second cloner and effect handle the small bubbles that come from the fish.
3. Bubbles for a Cinema 4D Redshift Animation: Balloon Spheres and a Propeller Trail
The bubble chapter is the most reusable part of this cinema 4d redshift animation. Instead of a single sphere, each bubble is a cluster that wobbles and sticks together.
3.1 Build the bubble cluster
- Create five Sphere objects. The ones we could read use Radius 7 or 8 cm, 20 to 24 segments and Type Icosahedron or Standard.
- Put them under a Connect object, then a Subdivision Surface, and add a Smoothing and a Displacer deformer for surface wobble.
- Give each sphere a Cloth tag set up as a Balloon (the tag shows a Balloon tab in Cinema 4D’s unified simulation system).
- Add a Field Force with Velocity Type set to Add to Velocity and Strength -300. Its field is a Point Object field layer using the main sphere, Mode Surface, Radius 500 cm, so the smaller spheres are pulled toward the main one.
- Add a Friction force so the cluster calms down instead of drifting forever.
3.2 Bubbles trailing from the propeller
A separate Cloner in Object mode uses a spline called “Spline propeler” as its source. Distribution is Count with 10 clones, Per Segment enabled, Offset 5%, End 100%, Loop on, and Rate 4%, so the clones travel along the spline over time. A Random Effector on top breaks up the spacing.
4. Paper Fold in a Cinema 4D Redshift Animation: Low Poly, Cloth and Reversed Playback
The chapter card names the three ingredients: “Lowpoly model, Cloth & Capucino”. The idea is to crush the finished scene into a crumpled sheet with a cloth simulation, record that motion, and then play it backwards so the audience sees paper unfolding into a submarine and a sea floor.
4.1 Step 1: Make low poly copies
Copies of the submarine and landscape go under Polygon Reduction generators. The frame we read shows Reduce Children Combined and Preserve 3D Boundaries enabled with Reduction Strength at 98%. Fewer, larger polygons fold like paper; a dense mesh would crumple like fabric.
4.2 Step 2: Add the Cloth tag and forces
The connected low poly object gets a Cloth tag. A Plane underneath acts as the floor, and two forces disturb the sheet: a Turbulence force (Strength 100 cm, Frequency 100%, Mode Acceleration) and a Rotation force. The narrator adjusts the cloth Surface settings between takes; the table lists both sets of values that appear on screen.
PAPER FOLD CLOTH SETTINGS
Two passes on the landscape copy. The video does not say which one is final.
| Parameter | Pass A (about 21:00) | Pass B (about 21:08) |
|---|---|---|
| Bendinessstiffness of folds | 10 | 20 |
| Stretchiness | 20 | 20 |
| Bounciness | 3 | 0 less bounce off the floor |
| Friction / Stickiness | 0.5 / 0 | 0.5 / 0 |
| Thickness / Target Length | 1 cm / 100% | 1 cm / 100% |
| Mass / Collision Side | 1 / Both | 1 / Both |
4.3 Step 3: Record and reverse
For the submarine, the simulated result is brought back as an Alembic object. In its settings the Time Remapping curve runs downward, which plays the cached crumple backwards. For the landscape, the simulated motion is recorded to keyframes (the dope sheet shows PLA tracks on the “LandPaper” object) and the Cloth tag is then switched off. The chapter title credits Cappuccino for the recording step; we could not read the exact recording settings in the video.
5. PolyFX Keyframes for the Cinema 4D Redshift Animation Reveal
After the fold, the submarine also assembles from loose polygons. A PolyFX object sits under the connected submarine copy, driven by a Plain Effector set to Relative mode with Position Y 100 cm, so each polygon starts 100 cm above its place. The effector’s Fields tab holds a Linear Field with Length 20 cm and Direction +X. The object list also shows Random Field objects in the setup, which break up the timing so polygons do not move in a perfect line.
The Linear Field is keyframed to travel along X across the submarine; in the frames we read, the “downsub” field sits near -141 cm on X and the “upsub” field near 289 cm. The object list shows two setups, labelled “downsub” and “upsub”, each with its own Plain Effector, Linear Field and Random Field, which lets one pass drop polygons in and another lift them away.
6. Water, Camera, Lighting and Redshift Materials for the Cinema 4D Animation
Chapter 4 adds a Backdrop and a wavy water plane, seen as a dense displaced mesh around the diorama. Chapter 6 switches to Redshift tools: an RS Camera, an RS Area Light with Area Shape Rectangle, Size X 400 cm and Intensity 100, and an Environment object. Materials use Redshift’s Car Paint node, for example a blue base layer for the stripes, and the RenderView is used for progressive previews before the final frame goes to the Picture Viewer at 1920 x 1080.
Redshift became the default renderer in Cinema 4D 2024.0, which is the version used here, so no separate install step is shown. If you plan to render this cinema 4d redshift animation on a GeForce RTX 50 card, Maxon’s compatibility chart first lists RTX 50 (Blackwell) support in Redshift 2025.3.0, and its 2025.5.0 entry gives driver 572.16 or later on Windows.
COMMON PROBLEMS WITH THIS SETUP
Editor’s notes based on how these tools behave.
| Problem | Likely cause | What to try |
|---|---|---|
| Bubbles fly apartField Force | Positive strength pushes instead of pulls | Use a negative Strength, as the video does (-300). |
| Cloth explodes at frame 0Cloth tag | Starting overlaps parts touch inside Thickness | Maxon advises no contacts at the start; separate parts or lower Thickness. |
| Paper folds look softMesh density | Too many polygons | Raise Polygon Reduction strength. |
| Unfold plays the wrong wayAlembic | Remapping curve not inverted | Invert the Time Remapping curve. |
| PolyFX moves everything at onceFields | No falloff Linear Field not keyframed | Keyframe the Linear Field position across the model. |
7. Rendering the Cinema 4D Redshift Animation
Before rendering, collect everything the scene depends on. The Alembic file for the reversed submarine is an external file, so it has to travel with the project; the keyframed landscape lives inside the .c4d file. Cloth and balloon caches can be baked in the Cache tab of the Cloth tag, which also keeps the result identical between preview and final frames. See our guide to the best GPU for Redshift rendering if you are choosing hardware for scenes like this.
If one local GPU is too slow for the frame range, the options are adding a second card, using a SaaS farm that supports Redshift for Cinema 4D, or renting a remote GPU machine. iRender rents servers with 1, 2, 4 or 8 GPUs where you install Cinema 4D and Redshift yourself; the catch is that each time you start a machine you wait roughly 7 to 15 minutes for it to boot before you can work.
Related techniques: the Cloth tag behind the paper fold is explored further in Cinema 4D cloth simulation effects, and another PolyFX approach appears in the Cinema 4D disintegration effect.
Maximum Speed, Absolute Freedom. Render Redshift animations on dedicated multi-GPU servers. Render with iRender →
FAQ: Cinema 4D Redshift Animation
The tutorial crumples a low poly copy of the scene with a Cloth tag, a Turbulence force and a Rotation force on a floor plane, records the result, then plays it backwards. The submarine uses an Alembic cache with an inverted Time Remapping curve, and the landscape is recorded to keyframes. Played in reverse, the crumple reads as paper unfolding.
Large flat polygons bend at sharp creases, which looks like folded paper. A dense subdivided mesh bends smoothly and looks like fabric instead. The video reduces the copies with Polygon Reduction at 98% strength with Preserve 3D Boundaries on, then simulates those low poly copies rather than the final models.
Each bubble is five spheres under a Connect and a Subdivision Surface, with Balloon-style Cloth tags. A Field Force with Strength -300 and a Point Object field on the main sphere pulls the smaller spheres onto it, and a Friction force calms the motion so the cluster wobbles instead of drifting apart.
The narrator uses Cinema 4D 2024. Redshift has been the default renderer since Cinema 4D 2024.0, so the Redshift camera, area light and Car Paint material are available without a separate setup. For GeForce RTX 50 cards, Maxon’s chart lists support from Redshift 2025.3.0, with driver 572.16 or newer on Windows.
A PolyFX object splits the submarine into polygons. A Plain Effector in Relative mode offsets them 100 cm on Y, and a keyframed Linear Field with a 20 cm length sweeps along X so polygons return to place one band at a time. Random Field objects in the setup add variation to the timing.
Bring the external Alembic file with the project and bake any cloth or balloon simulation in the Cloth tag Cache tab, so every frame is identical wherever it renders. Check that the Redshift version on the render machine supports its GPU, and keep the same Cinema 4D version the scene was built in.
Sources
- VFXRendering, Create a Yellow Submarine 3D Animation, Tutorial (YouTube). Settings read from the video.
- Maxon, Cinema 4D Help: The Simulation System, on Cloth, Balloon and Soft Body tags, start contacts and caching.
- CG Channel, Maxon releases Cinema 4D 2024 (September 2023), Redshift as default renderer.
- Maxon, Redshift Compatibility Chart, RTX 50 support and driver versions.
- iRender documentation (docs.gpuhub.net) and price page (irendering.net/price), read 20 November 2026.
No comments